HP E4510-48G, Command Reference Manual

Page: 633 / 1334

1-18
ucibindex ucib-index : Specifies all user connections using the specified connection index. The value
ranges from 0 to 4294967295.
user-name user-name : Specifies all user connections using the specified username. The user-name
argument is a case-sensitive string of 1 to 80 characters and must contain the domain name. If you
enter a username without any domain name, the system assumes that the default domain name is
used for the username.
slot slot-number : Specifies the connections on a specified member device in an IRF. The slot-number
argument indicates the member device ID.
Description
Use the display connection command to display information about specified or all AAA user
connections.
Note that:
z
With no parameter specified, the command displays brief information about all AAA user
connections.
z
If you specify the ucibindex ucib-index combination, the command displays detailed information;
otherwise, the command displays brief information.
z
This command does not apply to FTP user connections.
Related commands: cut connection .
Examples
# Display information about all AAA user connections.
<Sysname> display connection
Index=1 ,Username=telnet@system
IP=10.0.0.1
Total 1 connection(s) matched.
Table 1-1 display connection command output description
Field Description
Index Index number
Username
Username of the connection, in the format
username@domain
IP IP address of the user
Total 1 connection(s) matched. Total number of user connections
display domain
Syntax
display domain [ isp-name ]
View
Any view