HP E4510-48G, Command Reference Manual

Page: 616 / 1334

1-1
1
AAA Configuration Commands
AAA Configuration Commands
access-limit enable
Syntax
access-limit enable max-user-number
undo access-limit enable
View
ISP domain view
Default Level
2: System level
Parameters
max-user-number : Maximum number of user connections for the current ISP domain. The valid range
from 1 to 2147483646.
Description
Use the access-limit enable command to enable the limit on the number of user connections in an
ISP domain and set the allowed maximum number. After the number of user connections reaches the
maximum number allowed, no more users will be accepted.
Use the undo access-limit enable command to restore the default.
By default, there is no limit to the number of user connections in an ISP domain.
As user connections may compete for network resources, setting a proper limit to the number of user
connections helps provide a reliable system performance.
Examples
# Set a limit of 500 user connections for ISP domain aabbcc.net .
<Sysname> system-view
[Sysname] domain aabbcc.net
[Sysname-isp-aabbcc.net] access-limit enable 500
access-limit
Syntax
access-limit max-user-number
undo access-limit