HP E4510-48G, Command Reference Manual

Page: 577 / 1334

1-14
Use the undo remark local-precedence command to remove the action of remarking local
precedence.
Note that, when the remark dot1p command is used together with the remark local-precedence
command, the 802.1p precedence to be set for packets must be the same as the local precedence to
be set for packets. Otherwise, the corresponding policy cannot be applied successfully.
Related commands: qos policy , traffic behavior , classifier behavior .
Examples
# Configure the action to set local precedence to 2 for a traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark local-precedence 2
traffic behavior
Syntax
traffic behavior behavior-name
undo traffic behavior behavior-name
View
System view
Default Level
2: System Level
Parameters
behavior-name : Name of the traffic behavior to be created, a case-sensitive string of 1 to 31 characters.
No spaces are allowed in a traffic behavior name.
Description
Use the traffic behavior command to create a traffic behavior. This command also leads you to traffic
behavior view.
Use the undo traffic classifier command to remove a traffic behavior.
Related commands: qos policy , qos apply policy , classifier behavior .
Examples
# Define a traffic behavior named behavior1.
<Sysname> system-view
[Sysname] traffic behavior behavior1
[Sysname-behavior-behavior1]