HP E4510-48G, Command Reference Manual

Page: 574 / 1334

1-11
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark dot1p 2
remark drop-precedence
Syntax
remark drop-precedence drop-precedence-value
undo remark drop-precedence
View
Traffic behavior view
Default Level
2: System Level
Parameters
drop-precedence-value : Drop precedence to be set for packets, in the range 0 to 2.
Description
Use the remark drop-precedence command to configure the action of setting drop precedence for a
traffic behavior.
Use the undo remark drop-precedence command to remove the action of setting drop precedence.
Related commands: qos policy , traffic behavior , classifier behavior .
Examples
# Configure the action to set drop precedence to 2 for a traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark drop-precedence 2
remark dscp
Syntax
remark dscp dscp-value
undo remark dscp
View
Traffic behavior view
Default Level
2: System Level
Parameters
dscp-value : DSCP precedence to be set for packets, in the range of 0 to 63. This argument can also be
the keywords listed in Table 1-4 .