HP E4510-48G, Command Reference Manual

Page: 490 / 1334

6-9
Default Level
2: System level
Parameters
acl-number : ACL number from 2000 to 3999.
Description
Use the if-match acl command to configure an ACL match criterion.
Use the undo if-match acl command to remove the match criterion.
No ACL match criterion is configured by default.
Related commands: if-match interface , if-match ip next-hop , if-match cost , if-match tag ,
route-policy , apply ip-address next-hop , apply cost , apply tag .
Examples
# Configure node 10 of route policy policy1 to permit routes matching ACL 2000.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match acl 2000
if-match ip
Syntax
if-match ip { next-hop | route-source } { acl acl-number | ip-prefix ip-prefix-name }
undo if-match ip { next-hop | route-source } [ acl | ip-prefix ]
View
Route policy view
Default Level
2: System level
Parameters
next-hop : Matches the next hop of routing information to the filter.
route-source : Matches the source address of routing information to the filter.
acl acl-number : Matches an ACL with a number from 2000 to 2999.
ip-prefix ip-prefix-name : Matches an IP prefix list with a name being a string of 1 to 19 characters.
Description
Use the if-match ip command to configure a next hop or source address match criterion for IPv4
routes.
Use the undo if-match ip command to remove the match criterion.
The match criterion is not configured by default.
Related commands: route-policy .