3-26
[Sysname-rip-100] network 131.108.0.0
summary
Syntax
summary
undo summary
View
RIP view
Default Level
2: System level
Parameters
None
Description
Use the
summary
command to enable automatic RIPv2 summarization. Natural masks are used to
advertise summary routes so as to reduce the size of routing tables.
Use the
undo summary
command to disable automatic RIPv2 summarization so that all subnet routes
can be broadcast.
By default, automatic RIPv2 summarization is enabled.
Enabling automatic RIPv2 summarization can reduce the size of the routing table to enhance the
scalability and efficiency of large networks.
Related commands:
rip version
.
Examples
# Disable RIPv2 automatic summarization.
<Sysname> system-view
[Sysname] rip
[Sysname-rip-1] undo summary
timers
Syntax
timers
{
garbage-collect garbage-collect-value
|
suppress suppress-value
|
timeout timeout-value
|
update update-value
}*
undo timers
{
garbage-collect
|
suppress
|
timeout
|
update
} *
View
RIP view
Default Level
2: System level
Summary of Contents for E4510-48G
