3-22
Use the
undo rip output
command to disable the interface from sending RIP messages.
Sending RIP messages is enabled on an interface by default.
Related commands:
rip input
.
Examples
# Disable VLAN-interface 10 from receiving RIP messages.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] undo rip output
rip poison-reverse
Syntax
rip poison-reverse
undo rip poison-reverse
View
Interface view
Default Level
2: System level
Parameters
None
Description
Use the
rip poison-reverse
command to enable the poison reverse function.
Use the
undo rip poison-reverse
command to disable the poison reverse function.
By default, the poison reverse function is disabled.
Examples
# Enable the poison reverse function for RIP routing updates on VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] rip poison-reverse
rip split-horizon
Syntax
rip split-horizon
undo rip split-horizon
View
Interface view
Summary of Contents for E4510-48G
