HP E4510-48G, Command Reference Manual

Page: 427 / 1334

1-18
Destination: ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Direct Routing Table's Status : < Inactive >
Summary Count : 0
Refer to Table 1-4 for description about the above output.
display ipv6 routing-table statistics
Syntax
display ipv6 routing-table statistics
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ipv6 routing-table statistics command to display routing statistics, including total
route number, added route number and deleted route number.
Examples
# Display routing statistics.
<Sysname> display ipv6 routing-table statistics
Protocol route active added deleted freed
DIRECT 1 1 1 0 0
STATIC 3 0 3 0 0
RIPng 0 0 0 0 0
Total 4 1 4 0 0
Table 1-5 display ipv6 routing-table statistics command output description
Field Description
Protocol Routing protocol
route Route number of the protocol
active Number of active routes
added Routes added after the last startup of the router
deleted Deleted routes, which will be released after a specified time
freed Released (totally removed from the routing table) route number
Total Total number of routes