12-9
Field
Description
Protocol
Link protocol state of the interface:
z
down: Indicates that the link layer protocol state of the VLAN interface is
down, generally because no IP address is configured.
z
up: Indicates that the link layer protocol state of the VLAN interface is up.
IPv6 Address
IPv6 address of the interface. Only the first of configured IPv6 addresses is
displayed. (If no address is configured for the interface, “Unassigned” will be
displayed.)
display ipv6 neighbors
Syntax
display ipv6 neighbors
{
{
ipv6-address | all | dynamic
|
static
} [
slot
slot-number
] |
interface
interface-type interface-number
|
vlan
vlan-id
} [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-address
: IPv6 address whose neighbor information is to be displayed.
all
: Displays information of all neighbors, including neighbors acquired dynamically and configured
statically.
dynamic
: Displays information of all neighbors acquired dynamically.
static
: Displays information of all neighbors configured statically.
slot slot-number
: Displays information of the neighbors of a specified device in an IRF. If no IRF is
formed, the neighbors of the current device are displayed only. The
slot-number
argument indicates
the member ID of the device.
interface interface-type interface-number
: Displays information of the neighbors of a specified
interface.
vlan
vlan-id
: Displays information of the neighbors of a specified VLAN whose ID ranges from 1 to
4094.
|
: Uses a regular expression to match neighbor entries. For detailed information about regular
expression, refer to CLI display in
Basic System Configuration
in the
System Volume
.
begin
: Displays a specific neighbor entry and all the neighbor entries following it. The specific neighbor
entry must match the specified regular expression.
exclude
: Displays the neighbor entries not matching the specified regular expression.
include
: Displays the neighbor entries matching the specified regular expression.
regular-expression
: A case-sensitive string of 1 to 256 characters.
Description
Use the
display ipv6 neighbors
command to display neighbor information.
Summary of Contents for E4510-48G
