HP E4510-48G, Command Reference Manual

Page: 301 / 1334

5-15
Examples
# Display information about all bindings.
<Sysname> display dhcp relay security
IP Address MAC Address Type Interface
10.1.1.1 00e0-0000-0001 Static Vlan1
10.1.1.5 00e0-0000-0000 Static Vlan2
--- 2 dhcp-security item(s) found ---
Table 5-2 display dhcp relay security command output description
Field Description
IP Address Client IP address
MAC Address Client MAC address
Type Type of binding, including dynamic, static, and temporary.
Interface
Layer 3 interface connecting to the DHCP client. If no interface is recorded in
the binding entry, “N/A” is displayed.
display dhcp relay security statistics
Syntax
display dhcp relay security statistics
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display dhcp relay security statistics command to display statistics information about
bindings of DHCP relay agents.
Examples
# Display statistics about bindings of DHCP relay agents.
<Sysname> display dhcp relay security statistics
Static Items :1
Dynamic Items :0
Temporary Items :0
All Items :1