HP E4510-48G, Command Reference Manual

Page: 290 / 1334

5-4
Examples
# Enable Option 82 support on the relay agent.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] dhcp relay information enable
dhcp relay information format
Syntax
dhcp relay information format { normal | verbose [ node-identifier { mac | sysname |
user-defined node-identifier } ] }
undo dhcp relay information format [ verbose node-identifier ]
View
Interface view
Default Level
2: System level
Parameters
normal : Specifies the normal padding format.
verbose : Specifies the verbose padding format.
node-identifier { mac | sysname | user-defined node-identifier }: Specifies access node identifier. By
default, the node MAC address is used as the node identifier.
z
mac indicates using MAC address as the node identifier.
z
sysname indicates using the device name of a node as the node identifier.
z
user-defined node-identifier indicates using a specified character string as the node identifier, in
which node-identifier is a string with 1 to 50 characters.
Description
Use the dhcp relay information format command to specify a padding format for Option 82.
Use the undo dhcp relay information format command to restore the default padding format.
The Option 82 padding format defaults to normal .