HP E4510-48G, Command Reference Manual

Page: 265 / 1334

2-5
Field Description
Aging
Aging time for a dynamic ARP entry in minutes (“N/A” means unknown
aging time or no aging time)
Type ARP entry type: D for dynamic, S for static
Vpn-instance Name
Name of VPN instance. [No Vrf] means no VPN instance is configured
for the corresponding ARP.
# Display the number of all ARP entries.
<Sysname> display arp all count
Total entry(ies): 4
display arp ip-address
Syntax
display arp ip-address [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
ip-address: Displays the ARP entry for the specified IP address.
slot slot-number : Displays the ARP entry for the specified device. If the device is in an IRF, the
slot-number argument represents the member ID of the device; if the device is not in any IRF, the
slot-number argument represents the device ID.
| : Uses a regular expression to specify the ARP entries to be displayed. For detailed information about
regular expressions, refer to Basic System Configuration in the System Volume .
begin : Displays the ARP entries from the first one containing the specified string.
exclude : Displays the ARP entries that do not contain the specified string.
include : Displays the ARP entries that contain the specified string.
regular-expression : A case-sensitive string for matching, consisting of 1 to 256 characters.
Description
Use the display arp ip-address command to display the ARP entry for a specified IP address.
Related commands: arp static , reset arp .
Examples
# Display the corresponding ARP entry for the IP address 20.1.1.1.
<Sysname> display arp 20.1.1.1
Type: S-Static D-Dynamic
IP Address MAC Address VLAN ID Interface Aging Type
20.1.1.1 00e0-fc00-0001 N/A N/A N/A S