HP E4510-48G, Command Reference Manual

Page: 184 / 1334

6-5
Default Level
2: System level
Parameters
vlan-interface-id : VLAN interface number, in the range of 1 to 4094.
Description
Use the interface vlan-interface command to create a VLAN interface and enter its view or enter the
view of an existing VLAN interface.
Before you can create the VLAN interface of a VLAN, create the VLAN first.
Use the undo interface vlan-interface command to remove the specified VLAN interface.
You can use the ip address command in VLAN interface view to configure an IP address for a VLAN
interface to perform IP routing.
Related commands: display interface Vlan-interface .
Examples
# Create VLAN-interface 2.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] quit
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2]
ip address
Syntax
ip address ip-address { mask | mask-length } [ sub ]
undo ip address [ ip-address { mask | mask-length } [ sub ] ]
View
VLAN interface view
Default Level
2: System level
Parameters
ip-address : IP address to be assigned to the current VLAN interface, in dotted decimal format.
mask : Subnet mask in dotted decimal notation.
mask-length : Subnet mask length, the number of consecutive ones in the mask. The value range is 0
to 32.
sub : Indicates the address is a secondary IP address.
Description
Use the ip address command to assign an IP address and subnet mask to a VLAN interface.
Use the undo ip address command to remove the IP address and subnet mask for a VLAN interface.