HP E4510-48G, Command Reference Manual

Page: 1298 / 1334

20-34
Table 20-9 display cluster candidates verbose command output description
Field Description
Hostname Name of a candidate device
MAC MAC address of a candidate device
Hop Hops from a candidate device to the management device
IP IP address of a candidate device
Device Platform information of a candidate device
display cluster current-topology
Syntax
display cluster current-topology [ mac-address mac-address [ to - mac-address mac-address ] |
member-id member-number [ to-member-id member-number ] ]
View
Any view
Default Level
2: System level
Parameters
member-number : Number of the devices in a cluster (including the management device and member
devices).
mac-address : MAC addresses of the devices in a cluster (including the management device and
member devices).
Description
Use the display cluster current-topology command to display the current topology information of the
cluster.
z
If you specify both the mac-address mac-address and to-mac-address mac-address arguments,
the topology information of the devices that are in a cluster and form the connection between two
specified devices is displayed.
z
If you specify both the member-id member-number and to-member-id member-number
arguments, the topology information of the devices that are in a cluster and form the connection
between two specified devices is displayed.
z
If you specify only the mac-address mac-address or member-id member-number argument, the
topology information of all the devices in a cluster is displayed, with a specified device as the root
node.
Note that this command can be executed on the management device only.
Examples
# Display the information of the current topology of a cluster.
<aaa_0.Sysname> display cluster current-topology