HP E4510-48G, Command Reference Manual

Page: 1278 / 1334

20-14
Description
Use the ntdp timer hop-delay command to set the delay time for the device to forward
topology-collection requests through the first port.
Use the undo ntdp timer hop-delay command to restore the default delay time, which is 200 ms.
Examples
# Set the delay time for the device to forward topology-collection requests through the first port to 300
ms.
<Sysname> system-view
[Sysname] ntdp timer hop-delay 300
ntdp timer port-delay
Syntax
ntdp timer port-delay time
undo ntdp timer port-delay
View
System view
Default Level
2: System level
Parameters
time : Delay time (in milliseconds) for a device to forward a topology-collection request through its
successive ports, in the range 1 to 100.
Description
Use the ntdp timer port-delay command to set the delay time for a device to forward a received
topology-collection request through its successive ports.
Use the undo ntdp timer port-delay command to restore the default delay time, or 20 ms.
Examples
# Set the delay time for the device to forward topology-collection requests through the successive
ports to 40 ms.
<Sysname> system-view
[Sysname] ntdp timer port-delay 40
Cluster Configuration Commands
add-member
Syntax
add-member [ member-number ] mac-address mac-address [ password password ]