HP E4510-48G, Command Reference Manual

Page: 1272 / 1334

20-8
Table 20-2 display ntdp command output description
Field Description
NTDP is running NTDP is enabled globally on the local device.
Hops Hop count for topology collection
Timer
Interval to collect topology information (after the cluster is
created)
disable
Indicates the device is not a management device and unable to
perform periodical topology collection
Hop Delay
Delay time for the device to forward topology collection
requests
Port Delay
Delay time for a topology-collection request to be forwarded
through a port
Last collection total time Time cost during the last collection
display ntdp device-list
Syntax
display ntdp device-list [ verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
verbose : Displays the detailed device information.
Description
Use the display ntdp device-list command to display the device information collected through NTDP.
Note that the information displayed may not be that of the latest device if you do not execute the ntdp
explore command before using this command.
Examples
# Display the device list collected through NTDP.
<Sysname> display ntdp device-list
MAC HOP IP Device
000f-e200-3133 2 Switch 4200G
000f-e20f-c415 2 31.31.31.5/24 Switch 4200G
000f-e200-2579 1 Switch 4200G
000f-e200-1751 0 31.31.31.1/24 Switch 4200G
00e0-fd00-0043 2 Sysname S3528P
000f-e200-3199 3 Switch 4200G