HP E4510-48G, Command Reference Manual

Page: 1179 / 1334

16-2
channel number:0, channel name:console
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y warnings Y debugging Y debugging
The above information indicates to output log information with the severity from 0 to 4, trap information
with the severity from 0 to 7 and debugging information with the severity from 0 to 7 to the console.
The information source modules are all modules (default).
Table 16-2 display channel command output description
Field Description
channel number A specified channel number, in the range 0 to 9.
channel name
A specified channel name, which varies with user’s configuration. For
more information, refer to the
info-center channel name command.
MODU_ID
The ID of the module to which the information permitted to pass through
the current channel belongs
NAME
The name of the module to which the information permitted to pass
through the current channel belongs
Default means all modules are allowed to output system information, but
the module type varies with devices.
ENABLE
Indicates whether to enable or disable the output of log information,
which could be Y or N.
LOG_LEVEL The severity of log information, refer to Table 16-4 for details.
ENABLE
Indicates whether to enable or disable the output of trap information,
which could be Y or N.
TRAP_LEVEL The severity of trap information, refer to Table 16-4 for details.
ENABLE
Indicates whether to enable or disable the output of debugging
information, which could be Y or N.
DEBUG_LEVEL The severity of debugging information, refer to Table 16-4 for details.
display info-center
Syntax
display info-center
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display info-center command to display the information of each output destination.