HP E4510-48G, Command Reference Manual

Page: 1166 / 1334

14-3
Description
Use the mac-address information interval command to set the interval for sending Syslog or Trap
messages.
Use the undo mac-address information interval command to restore the default interval for sending
Syslog or Trap messages.
By default, the interval for sending Syslog or Trap messages is 1 second.
Examples
# Set the interval for sending Syslog or Trap messages to 200 seconds.
<Sysname> system-view
[Sysname] mac-address information interval 200
mac-address information mode
Syntax
mac-address information mode { syslog | trap }
undo mac-address information mode
View
System view
Default Level
2: System level
Parameters
syslog : Specifies that the device sends Syslog messages to inform the remote network management
device of MAC address changes.
trap : Specifies that the device sends trap messages to inform the remote network management device
of MAC address changes.
Description
Use the mac-address information mode command to set the MAC Information mode, that is,
whether to use Syslog messages or Trap messages to inform the remote network management device
of MAC address changes.
Use the undo mac-address information mode command to restore the default.
By default, trap messages are sent to inform the remote network management device of MAC address
changes.
Examples
# Configure the device to send trap messages to inform the remote network management device of
MAC address changes.
<Sysname> system-view
[Sysname] mac-address information mode trap