HP E4510-48G, Command Reference Manual

Page: 1126 / 1334

10-19
undo snmp-agent packet max-size
View
System view
Default Level
3: Manage level
Parameters
byte-count : Maximum size of the SNMP packets that can be received or sent by the agent, in the range
484 to 17,940.
Description
Use the snmp-agent packet max-size command to configure the maximum size of the SNMP packets
that can be received or sent by the agent.
Use the undo snmp-agent packet max-size command to restore the default packet size.
By default, the maximum size of the SNMP packets that can be received or sent by the agent is 1,500
bytes.
If devices not supporting fragmentation exist on the routing path between the NMS and the agent, you
can use the command to configure the maximum SNMP packet size, and thus to prevent giant packets
from being discarded.
Typically, you are recommended to apply the default value.
Examples
# Configure the maximum size of the SNMP packets that can be received or sent by the SNMP agent
as 1,042 bytes.
<Sysname> system-view
[Sysname] snmp-agent packet max-size 1042
snmp-agent sys-info
Syntax
snmp-agent sys-info { contact sys-contact | location sys-location | version { all | { v1 | v2c | v3 } * } }
undo snmp-agent sys-info { contact | location | version { all | { v1 | v2c | v3 } * } }
View
System view
Default Level
3: Manage level
Parameters
contact sys-contact : A string of 1 to 200 characters that describes the contact information for system
maintenance.
location sys-location : A string of 1 to 200 characters that describes the location of the device.
version : The SNMP version in use.