HP E4510-48G, Command Reference Manual

Page: 1049 / 1334

5-15
Examples
# Restore file a.cfg in directory flash: from the recycle bin.
<Sysname> undelete a.cfg
Undelete flash:/a.cfg?[Y/N]:y
.....
%Undeleted file flash:/a.cfg.
# Restore file b.cfg in directory flash:/test from the recycle bin.
<Sysname> undelete flash:/test/b.cfg
Undelete flash:/test/b.cfg?[Y/N]:y
.......
%Undeleted file flash:/test/b.cfg.
Or, you can use the following steps to restore file flash:/test/b.cfg .
<Sysname> cd test
<Sysname> undelete b.cfg
Undelete flash:/test/b.cfg?[Y/N]:y
.....
%Undeleted file flash:/test/b.cfg.
Configuration File Management Commands
archive configuration
Syntax
archive configuration
View
User view
Default Level
3: Manage level
Parameters
None
Description
Use the archive configuration command to save the current running configuration manually.
After the execution of this command, the system saves the current running configuration with the
specified filename (filename serial number) to the specified path.
Note the following:
z
Before executing the archive configuration command, you must configure the filename prefix
and path of the saved configuration file by using the archive configuration location command.
z
After execution of the archive configuration command, the current running configuration is only
saved to the master, and the slaves do not perform the saving operation.