HP E3800 Series, Access Security Manual

Page: 274 / 732

6-58
RADIUS Authentication, Authorization, and Accounting
Accounting Services
Accounting Controls. These options are enabled separately, and define
how the switch will send accounting data to a RADIUS server:
■ Start-Stop:
Applies to the exec , network , and system accounting
service types:
• Send a “start record accounting” notice at the beginning of the
accounting session and a “stop record notice” at the end of the
session. Both notices include the latest data the switch has collected
for the requested accounting type.
• Do not wait for an acknowledgement.
■ Stop-Only: Applies to the
network
,
exec
,
system
, and
command
service
types, as described below:
• Send a stop record accounting notice at the end of the accounting
session. The notice includes the latest data the switch has collected
for the requested accounting type (
network , exec , or system service
types). For the commands service type, sends the “Stop” accounting
notice after execution of each CLI command.
• Do not wait for an acknowledgment.
■ Interim-Update:
Applies only to the command service type, and is
intended for use when the optional common session ID is configured.
Enabling interim-update in this case results in the command
accounting records appearing as enclosed sub-parts of the exec
service type record for a given management session. (Using interim-
update when the
unique session ID is configured has no effect because
in this case, the different service types appear as separate accounting
processes with separate Acct-Session-ID values.
N o t e
Configuring interim-update for Command accounting results in all commands
being reported as “update” records, regardless of whether common or unique
is configured for the accounting session ID (page 6-56).