HP E2620, Installation And Getting Started Manual

Page: 58 / 116

2-34
Installing the Switch
Sample Network Topologies for PoE+ Switches
Stacking the Switch
The E2620 and E2620-PoE+ Switches can be connected together, through
standard network connections, and managed through a single IP address. Up
to 16 switches can be connected together in such a “virtual stack”.
You identify an E2620 or E2620-PoE+ Switch as the “Commander” and give
that switch an IP address. Up to 15 other switches in the network can then
easily be configured as Members of the stack and managed through the
Commander’s IP address. The management includes Telnet access and web
browser interface access to the Commander and to each Member switch
through the Commander.
For more information on stacking your switch, see the Management and
Configuration Guide, which is on the HP Web site at
www.hp.com/networking/
support ,
(see page 1-14 ).