24
3)
Place the new component on the PCB. Be sure that it matches the PCB footprint.
4)
Solder the new component.
USB upstream connector CN602
Repair the USB upstream connector:
1)
Use a hot air gun to melt the solder on the pins. Pin solder with soldering iron and absorber. You can gently
push down with the soldering iron once everything is molten to move the CN602 out of the through holes.
USB upstream connector repairing
2)
Lift the CN602 connector from the PCB.
3)
Place the new component on the PCB. Be sure that it matches the PCB footprint.
4)
Solder the new component.
USB connector P101, P102
Repair the USB connector:
1)
Use a hot air gun to melt the solder on the pins. Pin solder with soldering iron and absorber. You can gently
push down with the soldering iron once everything is molten to move the P101, P102 out of the through
holes.
USB Connector repairing
2)
Lift the P101, P102 connector from the PCB.
3)
Place the new component on the PCB. Be sure that it matches the PCB footprint.
4)
Solder the new component.
Summary of Contents for E243M
Page 4: ......
Page 13: ...9 Barcode label for India region ...
Page 32: ...28 ...
Page 33: ...29 ...
