HP E1725C, Getting Started Manual

Page: 53 / 100

Chapter 3 Practice Using the TIA Software
Where to Go Now
Getting Started Guide 3-19
3
Markers are also available on this display. Simply drag the marker to the
desired area with your mouse. Marker results are reported below the main
display. Statistical results, based on the data between the markers, are
reported above the main display.
When you zoom this display, the relationship of the portion of the data
viewed to all acquired data is indicated in the narrow horizontal bar just
above the main display.
Histogram results are also available in the Sequential record mode. Select
the Histogram display to see the histogram of the sequential results.
This completes the TIA software tutorial practice session.
Where to Go Now
For tutorials to help you measure formatted or unformatted disk drives
and perform timing pattern analysis, select the Help menu, Contents, and
then Tutorials.
To learn about other software capabilities, go to Chapter 4, which uses
stored waveforms. Examples of data-to-data, data-to-clock, and PLL
settling time measurements are described.