CLI commands
LLDP agent context
2-189
basic-tlv-enable system_name
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
basic-tlv-enable system_name
Enables the system name TLV.
no basic-tlv-enable system_name
Disables the system name TLV.
dot3-tlv-enable
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
dot3-tlv-enable
Enables the 803.3 MAC/PHY TLV.
no dot3-tlv-enable
Disables the 803.3 MAC/PHY TLV.
end
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
end
Go to previous context.
ip-addr-enable
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
ip-addr-enable
<ipaddress>
Sets the IP address to be enabled.
med-application-type
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
med-application-type
<type>
Sets MED Application Type for this port.
medtlv-enable capabilities
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
medtlv-enable capabilities
Enables the MED Capabilities TLV.
no medtlv-enable capabilities
Disables the MED Capabilities TLV.
Summary of Contents for E-MSM720
