![HP E-MSM720 Reference Manual Download Page 197](http://html.mh-extra.com/html/hp/e-msm720/e-msm720_reference-manual_157754197.webp)
CLI commands
Controlled APs context
2-147
Controlled APs context
Path:
View > Enable > Controlled APs
Use these commands to configure controlled APs.
end
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
end
Switches to parent context.
execute action
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
execute action (synchronize | accept-suspicious | accept-product | rediscover)
Execute an action on the entity’s devices.
execute system action
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
execute system action (restart | reset | switch-mode)
Execute a system action on the AP.
show config factory
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
show config [factory]
Displays the current configuration as a list of CLI commands.
ap group
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
ap group
<name>
Change the AP group (must Synchronize).
ap name
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
ap name
<name>
Change the current AP name.
config
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
config
Switch to generic configuration context.
Summary of Contents for E-MSM720
