manualshive.com logo in svg

HP E-MSM720, Reference Manual

Share
Download
HP E-MSM720 Reference Manual Download Page 183

CLI commands

Syslog context

2-133

logging source 

Supported on:   MSM710 E-MSM720 MSM760 MSM765zl

 

logging source (local | controlled_aps | controllers | all) 

Sets the source used when logging messages to a syslog server. 

end 

Supported on:   MSM710 E-MSM720 MSM760 MSM765zl

 

end 

Switches to parent context. 

level 

Supported on:   MSM710 E-MSM720 MSM760 MSM765zl

 

level 

Enables filtering of the log file by severity level. 

no level 

Disables filtering of the log file by severity level. 

level 

Supported on:   MSM710 E-MSM720 MSM760 MSM765zl

 

level (lower | higher) (debug | info | notice | warning | error | critical | 
alert | emergency) 

Defines the severity of messages that will be logged. 

no level 

Disables filtering of the log file by severity level.

Parameters

debug

Debug-level messages.

info

Informational messages.

notice

Normal, but significant condition.

warning

Warning conditions.

error

Error conditions.

critical

Critical conditions.

alert

Action must be taken immediately.

emergency

System is unusable.

matches 

Supported on:   MSM710 E-MSM720 MSM760 MSM765zl

 

matches (any | all) filters 

All three log file filters (message, process, and level) are combined to filter the log according to 

this setting. 

Summary of Contents for E-MSM720





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands