HP E-MSM720 Reference Manual Download Page 177

Page: 177 / 244

CLI commands

DHCP server context

2-127

DHCP server context

Path:

View > Enable > Config > DHCP server

Use this context to configure DHCP server settings.

end

Supported on: MSM710 E-MSM720 MSM760 MSM765zl

end

Switches to parent context.

active

Supported on: MSM710 E-MSM720 MSM760 MSM765zl

active

This range is enabled.

no active

This range is not enabled.

gateway

Supported on: MSM710 E-MSM720 MSM760 MSM765zl

gateway

<ip address>

Sets the default gateway provided to DHCP clients.

no gateway

Reset the default gateway provided to DHCP clients.

range

Supported on: MSM710 E-MSM720 MSM760 MSM765zl

range

<start-range>

<end-range>

Specify the DHCP server IP address range.

permanent leases

Supported on: MSM710 E-MSM720 MSM760 MSM765zl

permanent leases

<ip address>

<macaddr>

<uid>

Adds a permanent DHCP lease for this mapping.

no permanent leases

<ip address>

<macaddr>

<uid>

Deletes a permanent DHCP lease for this mapping.

Summary of Contents for E-MSM720





















































































































































































































































Search results

Summary of Contents for E-MSM720

Reviews:

Brands by name

Popular brands

HP E-MSM720, Reference Manual

Search results

Summary of Contents for E-MSM720

Reviews:

Brands by name

Popular brands