manualshive.com logo in svg

HP E-MSM720, Reference Manual, Page: 170 / 244

Share
Download
HP E-MSM720 Reference Manual Download Page 170

CLI commands

VLAN interface context

2-120

VLAN interface context 

Path:

View > Enable > Config > VLAN interface 
 View > Enable > Config > Internet port interface > VLAN interface 
 View > Enable > Config > LAN port interface > VLAN interface

Use this context to configure VLANs.

end 

Supported on:   MSM710 E-MSM720 MSM760 MSM765zl

 

end 

Switches to parent context. 

ip address 

Supported on:   MSM710 E-MSM720 MSM760 MSM765zl

 

ip address 

<ip address>

/

<mask>

 

Sets a static IP address for the VLAN.

Parameters

<address>

IP address.

</mask>

Subnet mask in CIDR format. Specifies the number of bits in the mask.

ip address mode 

Supported on:   MSM710 E-MSM720 MSM760 MSM765zl

 

ip address mode (dhcp | static | none) 

Sets the IP addressing mode for this VLAN interface.

Parameters

dhcp

Dynamic host configuration protocol. The DHCP server will automatically 
assign an address to the controller, which functions as a DHCP client.

static

This option enables you to manually assign an IP address to the controller.

none

This VLAN does not have an IP address.

New

tagged 

Supported on:  E-MSM720  

tagged 

<port>

 

Assigns the current VLAN to the specified port as tagged. 

no tagged 

<port>

 

Removes the current VLAN from the specified port. 

New

untagged 

Supported on:  E-MSM720  

untagged 

<port>

 

Assigns the current VLAN to the specified port as untagged. 

Summary of Contents for E-MSM720





















































































































































































































































Reviews:

No comments