manualshive.com logo in svg

HP E-MSM720, Reference Manual, Page: 168 / 244

Share
Download
HP E-MSM720 Reference Manual Download Page 168

CLI commands

Interface context

2-118

Interface context 

Path:

View > Enable > Config > Interface

Use this context to configure an physical interface (port).

New

duplex-mode 

Supported on:  E-MSM720  

duplex-mode (auto | half | full) 

Sets the duplex mode for the current port. 

New

end 

Supported on:  E-MSM720  

end 

Switches to parent context. 

New

flow-control 

Supported on:  E-MSM720  

flow-control 

Enables flow control on the current port. 

no flow-control 

Disables flow control on the current port. 

New

flow-control auto-negotiation 

Supported on:  E-MSM720  

flow-control auto-negotiation 

Enables flow control auto negotiation on the current port. 

no flow-control auto-negotiation 

Disables flow control auto negotiation on the current port. 

New

speed 

Supported on:  E-MSM720  

speed (auto | 10 | 100 | 1000 | 10-100) 

Sets the speed for the current port. 

New

trunk group 

Supported on:  E-MSM720  

trunk group 

<group>

 

Sets the trunk group number when "trunk type" is set to "trunk". 

Summary of Contents for E-MSM720





















































































































































































































































Reviews:

No comments