![HP E-MSM720 Reference Manual Download Page 160](http://html.mh-extra.com/html/hp/e-msm720/e-msm720_reference-manual_157754160.webp)
CLI commands
Virtual AP context
2-110
beacon transmit power
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
beacon transmit power
Advertise the current transmit power setting in the beacon.
no beacon transmit power
Do not advertise the current transmit power setting in the beacon.
broadcast filter
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
broadcast filter
Improve performance by not sending most broadcasts.
no broadcast filter
Send all broadcasts over wireless.
data rate
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
data rate (a | b | g | bg | n)
<rate>
Enable the given data rate for a particular PHY type.
no data rate (a | b | g | bg | n)
<rate>
Disable the given data rate for a particular PHY type.
public forwarding
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
public forwarding (any | 802.1x | none | ipv6)
Enables support for traffic exchange between wireless client stations.
access lan stations
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
access lan stations
Permits traffic exchange between wireless and wired users.
no access lan stations
Blocks traffic exchange between wireless and wired users.
fast authentication
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
fast authentication
Enables WPA2 opportunistic key caching.
no fast authentication
Disables WPA2 opportunistic key caching.
Summary of Contents for E-MSM720
