manualshive.com logo in svg

HP E-MSM720, Reference Manual

Share
Download
HP E-MSM720 Reference Manual Download Page 155

CLI commands

Virtual AP context

2-105

Description

The controller features an intelligent bridge which can apply security filters to safeguard the flow 
of wireless traffic. The filters limit both incoming and outgoing traffic as defined below, and force 

the controller to exchange traffic with a specific upstream device. If the controller is configured to 

use the services of a HP access controller, then the default security filters are automatically 
enabled and all traffic is sent to the access controller.

Default filters for incoming wireless traffic

Applies to traffic sent from wireless client stations to the controller.

Accepted

„

Any IP traffic addressed to the access controller.

„

PPPoE traffic (The PPPoe server must be the upstream device.)

„

IP broadcast packets, except NetBIOS

„

Certain address management protocols (ARP, DHCP) regardless of their source address.

„

Any traffic addressed to the controller, including 802.1X.

Blocked

„

All other traffic is blocked. This includes NetBIOS traffic regardless of its source/destination 
address. TTPS traffic not addressed to the controller (or upstream device) is also blocked, 

which means wireless client stations cannot access the management tool on other HP 

products.

Default filters for outgoing wireless traffic

Applies to traffic sent from the controller to wireless client stations.

Accepted

„

Any IP traffic coming from the upstream device, except NetBIOS packets.

„

PPPoE traffic from the upstream device.

„

IP broadcast packets, except NetBIOS

„

ARP and DHCP Offer and ACK packets.

„

Any traffic coming from the controller itself, including 802.1X.

Blocked

„

All other traffic is blocked. This includes NetBIOS traffic regardless of its source/destination 

address.

mac-filters local 

Supported on:   MSM710 E-MSM720 MSM760 MSM765zl

 

mac-filters local 

Enables the MAC filter list. 

no mac-filters local 

Disables the MAC filter list. 

Summary of Contents for E-MSM720





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands