Table 9-2
Display specifications (continued)
Metric
U.S.
Resolution
3000 × 2000 (3k2k)
1920 × 1280 (WUXGA+)
Surface treatment
BrightView
Antiglare
Brightness
400 nits
1000 nits (privacy panel)
Viewing angle
UWVA
Backlight
WLED
Solid-state drive specifications
This section provides specifications for your solid-state drives.
Table 9-3
Solid-state drive specifications
256 GB*
512 GB*
1 TB*
2 TB*
Dimensions
Height
1.0 mm
1.0 mm
1.0 mm
1.0 mm
Length
50.8 mm
50.8 mm
50.8 mm
50.8 mm
Width
28.9 mm
28.9 mm
28.9 mm
29.0 mm
Weight
< 10 g
< 10 g
< 10 g
< 10 g
Interface type
PCIe
PCIe
PCIe
PCIe
Ready time, maximum (to not busy)
1.0 ms
< 1.0 ms
1.0 ms
1.0 ms
Access times, logical
0.1 ms
0.1 ms
0.1 ms
0.1 ms
Transfer rate
Sequential read
up to 2150 MBps up to 2150 MBps up to 2150 MBps
up to 2150 MBps
Random read
Up to 300,000
IOPs
Up to 300,000
IOPs
Up to 300,000 IOPs
Up to 300,000 IOPs
Sequential write
up to 1550 MBps up to 1550 MBps up to 1550 MBps
up to 1550 MBps
Random write
Up to 100,000
IOPs
Up to 100,000
IOPs
Up to 100,000 IOPs
Up to 100,000 IOPs
Total logical sectors
468,883,296
1,000,215,216
1,500,336,388
2,988,316,776
Operating temperature
0°C to 70°C (32°F to 158°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may
differ slightly.
NOTE:
Certain restrictions and exclusions apply. Contact support for details.
90
Chapter 9 Specifications
