HP Dragonfly Folio Maintenance And Service Manual Download

Page: 62 / 109

Top cover with keyboard

The top cover with keyboard remains after removing all other spare parts from the computer. In this section,

the first table provides the main spare part number for the top cover with keyboards. The second table

provides the country codes.

Table 5-16

Top cover with keyboard descriptions and part numbers

Description

Spare part number

Top cover with keyboard, privacy models (includes thermal grease and replacement antennas)

N22552-xxx

Top cover with keyboard, nonprivacy models with an antiglare display (includes thermal grease and

replacement antennas)

N24787-xxx

Top cover with keyboard, nonprivacy models with a BrightView display (includes thermal grease and

replacement antennas)

N22553-xxx

Table 5-17

Spare part country codes

For use in country or region

Spare part

number

For use in country or region Spare part

number

For use in country or region Spare part

number

Belgium

-A41

Hungary

-211

Saudi Arabia

-171

Brazil

-201

Iceland

-DD1

Slovenia

-BA1

Bulgaria

-261

India

-D61

South Korea

-AD1

Chile

-161

Israel

-BB1

Spain

-071

Czech Republic/Slovakia

-FL1

Italy

-061

Switzerland

-BG1

Denmark

-081

Japan

-291

Taiwan

-AB1

Denmark, Finland, and

Norway

-DH1

The Netherlands

-B31

Thailand

-281

French Canada

-DB1

Northern Africa

-FP1

Turkey

-141

Finland/Sweden

-B71

Norway

-091

Turkey-F

-541

France

-051

Portugal

-131

Ukraine

-BD1

Germany

-041

Romania

-271

United Kingdom

-031

Greece

-151

Russia

-251

United States

-001

Display panel and subcomponents

To remove the display panel and components, use these procedures and illustrations.

Before removing the display panel, follow these steps:

Prepare the computer for disassembly (see

Preparation for disassembly on page 33

Remove the bottom cover (see

Bottom cover on page 33

Disconnect the battery cable from the system board (see

Battery on page 42

Remove the display panel and components:

To remove the display panel:

Chapter 5 Removal and replacement procedures for authorized service provider parts

Summary of Contents for Dragonfly Folio














































































































Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands

HP Dragonfly Folio, Maintenance And Service Manual

Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands