HP Dragonfly Folio Maintenance And Service Manual Download

Page: 55 / 109

Top speakers

To remove the top speakers, use this procedure and illustration.

Table 5-12

Top speakers description and part number

Description

Spare part number

Speakers

N22946-001

Before removing the top speakers, follow these steps:

Prepare the computer for disassembly (see

Preparation for disassembly on page 33

Remove the top cover (see

Bottom cover on page 33

Disconnect the battery cable from the system board (see

Battery on page 42

Remove the heat sink (see

Heat sink on page 47

Remove the top speakers:

Disconnect the both speaker cables from the system board (1).

Remove the antenna cables from the clips in each speaker (2).

Top speakers

Summary of Contents for Dragonfly Folio














































































































Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands

HP Dragonfly Folio, Maintenance And Service Manual

Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands