HP Dragonfly Folio Maintenance And Service Manual Download

Page: 43 / 109

Slide the sleeve off the solid-state drive to remove it.

Remove the Mylar from both sides of the solid-state drive. Install the Mylar on a new drive.

To install the solid-state drive, reverse the removal procedures.

NOTE:

Solid-state drives are designed with a notch to prevent incorrect insertion.

Magnetic pen slot

To remove the magnetic pen slot, use this procedure and illustration.

Table 5-3

Magnetic pen slot description and part number

Description

Spare part number

Magnetic pen slot

N26148-001

Before removing the magnetic pen slot, follow these steps:

Prepare the computer for disassembly (see

Preparation for disassembly on page 33

Remove the bottom cover (see

Bottom cover on page 33

Magnetic pen slot

Summary of Contents for Dragonfly Folio














































































































Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands

HP Dragonfly Folio, Maintenance And Service Manual

Search results

Summary of Contents for Dragonfly Folio

Reviews:

Related manuals for Dragonfly Folio

Brands by name

Popular brands