HP DL760 - ProLiant - 1 GB RAM User Manual Download Page 96

Page: 96 / 299

Installing Hardware Options, Server Power Off

Install the SCSI terminator supplied on the other external SCSI connector on the
rear panel of the external storage device.

Figure 4-5: Connecting an external mass storage device

Restore power to the external storage device.

10.

Connect all power cords and power up the server. Refer to Chapter 7 for more
information.

11.

To configure the device, refer to the documentation provided with the external
storage device.

Non-Hot-Plug I/O Expansion

The PCI/PCI-X slots of the ProLiant DL760 G2 server I/O board support a variety of
industry-standard expansion boards.

WARNING: To reduce the risk of personal injury from hazardous energy or
damage to the equipment when working on energized servers:

•

Remove all watches, rings, and any other loose-fitting jewelry.

•

Avoid the use of conductive tools that could bridge live parts.

HP ProLiant DL760 Generation 2 Server User Guide

4-7

HP CONFIDENTIAL

Writer: Jennifer Hayward File Name: e-ch4 Installing Options-Power Off.doc

Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/17/03 9:32 AM

Summary of Contents for DL760 - ProLiant - 1 GB RAM












































































































































































































































































































Search results

Summary of Contents for DL760 - ProLiant - 1 GB RAM

Reviews:

Brands by name

Popular brands

HP DL760 - ProLiant - 1 GB RAM, User Manual

Search results

Summary of Contents for DL760 - ProLiant - 1 GB RAM

Reviews:

Brands by name

Popular brands