manualshive.com logo in svg

HP DL760 - ProLiant - 1 GB RAM, User Manual, Page: 38 / 299

Share
Download
HP DL760 - ProLiant - 1 GB RAM User Manual Download Page 38

Server Features 

HP Utilities for Linux 

HP servers running Linux can take advantage of several utilities that provide detailed 
system information, including: 

• 

Array Configuration Utility for Linux 

• 

Compaq Storage Agents for Linux 

• 

Insight Diagnostics 

• 

Lights-Out Drivers and Agents for Linux 

• 

NIC Agents for Linux 

• 

Red Hat GL Utility Toolkit (GLUT) 

• 

Server Management Drivers and Agents 

These utilities are provided on the ProLiant Support Pack for Linux operating system. 

HP has an array of Opensource projects for Linux. For more information on HP 
Opensource projects refer to 

opensource.hp.com/ 

HP only supports servers configured with certified Linux operating system versions 
found on the Linux server certification matrix website: 

h18000.www1.hp.com/products/servers/linux/hplinuxcert.html 

Insight Manager 7 

Insight Manager 7 is a systems management tool that provides performance, 
configuration, and fault management for HP servers and clients. Insight Manager 7 
has two components: 

• 

Insight Manager 7 software, which runs on the management console 

• 

Management Agents (operating system-specific), which run on a server or 
managed desktop client 

HP ProLiant DL760 Generation 2 Server User Guide 

1-21

 

  

HP CONFIDENTIAL

 

Writer: Jennifer Hayward File Name: b-ch1 Server Features.doc 

Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/16/03 1:43 PM 

Summary of Contents for DL760 - ProLiant - 1 GB RAM












































































































































































































































































































Reviews:

No comments