background image

HP 17” Color Monitor User’s Guide

Care and Cleaning

18

English

English

Care and Cleaning

Do not place anything on top of the monitor. Doing so may block the 
monitor vents and cause damage to the monitor due to overheating. 
Do not let liquid get on or into the monitor. To maximize screen life 
and prevent damage to the picture tube (such as burned phosphor 
due to leaving the same image on the screen for a long time), it is 
recommended that you: 

Use the monitor power management system (on HP computers) or 
a screen saver program. 

Avoid setting contrast and brightness to their maximum levels for 
prolonged periods.

If you do not have a power management system or a screen saver 
program, switch the monitor off or reduce the brightness and 
contrast to minimum levels when the monitor is not in use. 

Your monitor has an anti-glare, anti-static screen coating. To prevent 
damage to the monitor screen's coating, use a regular household 
glass cleaner when cleaning the screen. To clean the screen: 

1

Switch the monitor off and remove the power plug (pull the plug, 

not the cable). 

2

Wet a soft cotton cloth with the cleaning solution and gently wipe 

the screen. Do not spray cleaner onto the screen because the 
cleaner may drip inside the monitor. 

3

Dry with a clean, soft cotton cloth. Do not use cleaning solutions 

containing fluoride, acids, or alkalis.

Environmental Information

HP has a strong commitment toward the environment. Your HP 
monitor has been designed to respect the environment as much as 
possible.

HP can also take back your old monitor for recycling when it reaches 
the end of its useful life. In fact, HP has a product take-back program 
in several countries. The collected equipment is sent to one of HP's 
recycling facilities in Europe or the USA. As many parts as possible 
are reused. The remainder is recycled. Special care is taken for 
batteries and other potentially toxic substances, which are reduced 
to non-harmful components through a special chemical process. If 
you require more details about HP's product take-back program, 
contact your dealer or your nearest HP Sales Office. 

The cathode ray tube used in this monitor does not contain cadmium.

Summary of Contents for D8906A




























Reviews: