Reset Configuration
Data
Disables/enables automatic reconfiguration.
The default is Disabled. Select Enabled to reset Extended System Configuration Data (ESCD) when
you exit Setup, if you have installed a new add-on and the system reconfiguration has caused such
a serious conflict that the OS cannot boot.
Resources Controlled
By
Allows you to select whether resources are controlled automatically or manually:
●
Auto (ESCD–Extended Storage Configuration Data)
●
Manual
BIOS can automatically configure all the bootable and Plug-and-Play-compatible devices. If you
choose Auto, you cannot select IRQ, DMA and memory base address fields since BIOS
automatically assigns them.
IRQ Resources
●
IRQ-3 assigned to
●
IRQ-4 assigned to
●
IRQ-5 assigned to
●
IRQ-7 assigned to
●
IRQ-9 assigned to
●
IRQ-10 assigned to
●
IRQ-11 assigned to
●
IRQ-12 assigned to
●
IRQ-14 assigned to
●
IRQ-15 assigned to
When resources are controlled manually, allows you to assign each system interrupt a type,
depending on the type of device using the interrupt.
Legacy ISA for devices compliant with the original PC AT bus specification, PCI/ISA PnP for devices
compliant with the Plug-and-Play standard whether designed for PCI or ISA bus architecture.
Computer Setup—Hardware Monitor Setup
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-9
Computer Setup—Hardware Monitor Setup
Option
Description
Reset Case Open
Status
Disables/enables resetting of the case open status.
Fan Controller
Disables/enables auto fan control mode.
CPU Fan Speed
(view only)
System Fan Speed
(view only)
CPU Fan Fault Detect
Disables/enables detection of CPU failure during POST.
SYS Fan Fault Detect
Disables/enables detection of fan failure during POST.
Table 2-8
Computer Setup—PnP/PCI Configurations (continued)
Computer Setup (F10) Utilities
11
