First Boot Device
Second Boot Device
Third Boot Device
Fourth Boot Device
Allows you to specify which devices will boot first, second, third, and fourth or to disable any of the
four:
●
Removable
●
Hard Disk
●
CDROM
●
Network
●
Disabled
NOTE:
MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system
has started.
Boot Other Device
Disables/enables boot other device.
Load Boot Menu
Selectable
Disables/enables boot menu selectable.
APIC Mode
Disables/enables the Advanced-PIC mode.
System Keyboard
Allows you to set the system keyboard to Absent or Present.
Boot Up NumLock
Status
Allows you to set the default NumLock status to off or on.
Security Option
Allows you to set the security option to Setup or System so that the password is required every time
the system boots or only when entering Computer Setup.
HDD S.M.A.R.T.
Capability
Disables/enables hard drive S.M.A.R.T. capability.
Computer Setup—Advanced Chipset Features
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-5
Computer Setup—Advanced Chipset Features
Option
Description
On-Chip Frame Buffer
Size
(VGA Setting)
Select the On-Chip Frame Buffer Size to:
●
32MB
●
64MB
●
128MB
PEG/Onchip VGA
Control
Allows you to set VGA control to:
●
Onchip VGA
●
PEG port
●
Auto
DVMT Mode
(VGA Setting)
Disables/enables DVMT mode.
Table 2-4
Computer Setup—Advanced BIOS Features (continued)
8
Chapter 2 Computer Setup (F10) Utility
