HP Compaq dx7200 MT, Reference Manual, Page: 182 / 216

D–6 390812-001 Service Reference Guide, dx7200
Troubleshooting Without Diagnostics
Solving Diskette Problems
Solving Diskette Problems
Problem Cause Solution
Diskette drive light stays on. Diskette is damaged. In Microsoft Windows XP, right-click
Start , click Explore , and select a
drive. Select File > Properties >
Tools . Under Error-checking ,
click Check Now .
Diskette is incorrectly
inserted.
Remove diskette and reinsert.
Drive button is not
pushed in.
Push in drive button.
Files on diskette are
damaged.
Check the program diskettes.
Drive cable is not
properly connected.
Reconnect power cable. Ensure that
all four pins are connected.
Drive not found. Cable is loose. Reseat diskette drive data and
power cables.
Removable drive is not
seated properly.
Reseat the drive.
Diskette drive cannot write
to a diskette.
Diskette is not
formatted.
Format the diskette.
Diskette is
write-protected.
Use another diskette or remove the
write protection.
Writing to the wrong
drive.
Check the drive letter in the path
statement.
Not enough space is
left on the diskette.
Use another diskette.
Diskette write control is
enabled.
Use Computer Setup to check the
storage security feature disabled
settings.
Diskette is damaged. Replace the damaged diskette.
Cannot format diskette. Invalid media reported. When formatting a disk in MS-DOS,
you may need to specify diskette
capacity. For example, to format a
1.44-MB diskette, type the following
command at the MS-DOS prompt:
FORMAT A: /F:1440
Diskette is
write-protected.
Use another diskette or remove the
write protection.
Diskette write control is
enabled.
Use Computer Setup to check the
storage security feature disabled
settings.