HP Compaq dx6120 Page 9 Hardware Reference Manual Download

Page: 9 / 64

Hardware Reference Guide

www.hp.com

1-5

Product Features

Windows Logo Key

Use the Windows Logo key in combination with other keys to
perform certain functions available in the Windows operating system.
Refer to the

“Keyboard”

section to identify the Windows Logo key.

Special Mouse Functions

Most software applications support the use of a mouse. The functions
assigned to each mouse button depend on the software applications
you are using.

Windows Logo Key Functions

Windows Logo Key

Displays or hides the Start menu.

Windows Logo Key +

Displays the Desktop.

Windows Logo Key +

Minimizes all open applications.

Shift

+ Windows Logo Key +

Undoes Minimize All.

Windows Logo Key +

Launches My Computer.

Windows Logo Key +

Launches Find Document.

Windows Logo Key +

Ctrl

Launches Find Computer.

Windows Logo Key +

Launches Windows Help.

Windows Logo Key +

Locks the computer if you are connected to a
network domain, or allows you to switch users if you
are not connected to a network domain.

Windows Logo Key +

Launches the Run dialog box.

Windows Logo Key +

Launches the Utility Manager.

Windows Logo Key +

Tab

Activates the next Taskbar button.

Summary of Contents for Compaq dx6120

































































Search results

Summary of Contents for Compaq dx6120

Reviews:

Related manuals for Compaq dx6120

Brands by name

Popular brands

HP Compaq dx6120, Hardware Reference Manual

Search results

Summary of Contents for Compaq dx6120

Reviews:

Related manuals for Compaq dx6120

Brands by name

Popular brands