Removing Bezel Blanks
On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch external drive bays that
need to be removed before installing a drive. To remove a bezel blank:
1.
Remove the front bezel.
2.
To remove a 5.25-inch blank, break the blank out of the bezel
(1)
.
– or –
To remove a 3.25-inch blank, press the two tabs on the left side of the blank
(2)
toward the right,
and then pull the blank inward to remove it
(3)
.
3.
Replace the front bezel.
Removing Bezel Blanks
33
