Service Reference Guide, dx2100 MT
404569-001
2–5
Setup Utilities and Diagnostics Features
Standard
CMOS
Features
(continued)
PATA Ch 0 Master
PATA Ch 0 Slave
(continued)
For each, allows you to: (continued)
• run SMART HDD status check and self-test for selected
channel (available if SMART IDE HDD installed)
• SMART Status Check
– Target Disk
– SMART
– SMART Status Check
• SMART Short Self-Test
– Target Disk
– Estimated Test Time
– Start Test
• SMART Extended Self-Test
– Target Disk
– Estimated Test Time
– Start Test
SATA Controller
Allows you to set SATA controller to:
• Disabled - disables SATA Controller
• Combined Mode - enables 1 PATA and 1 SATA channel
• Enhanced Mode - enables 1 PATA and 2 SATA channels
PATA IDE Mode
Allows you to determine if PATA device belongs to the Primary
or Secondary channel.
SATA Port
Displays the SATA port settings.
Heading
Option
Description
