Hardware Reference Guide
www.hp.com
2-39
Hardware Upgrades
✎
If you replaced the primary hard drive, insert the
Restore Plus!
CD
to restore the operating system, software drivers, and any software
applications that were preinstalled on the computer. Follow the
instructions in the guide included with the
Restore Plus!
CD. When
the restore process has completed, reinstall any personal files that you
backed up before replacing the hard drive.
Installing an Optional Drive into the 3.5-inch
Drive Bay
Depending on the computer configuration, the 3.5-inch drive bay on
the front of the computer may be configured with a diskette drive or it
may be an empty drive bay. The type of bezel covering the drive bay
will vary depending on the original computer configuration.
If the computer was not configured with a diskette drive, you can
install a 3.5-inch device, such as a diskette drive or hard drive,
into the
drive bay.
✎
The type of bezel you need will depend on the type of device you plan
to install. If you are installing a diskette drive, you must install a
diskette drive bezel (PN 360189-001). If you are installing a hard
drive, you must install a bezel blank (PN 358797-001). If you are
installing a 3.5-inch device other than a diskette drive or hard drive,
you must install the 3.5-inch device bezel (PN 358796-001). Contact
an authorized HP reseller or service provider to order the appropriate
bezel when reconfiguring the computer.
