HP 80-GB Solid State Drive
Unformatted Capacity
80-GB
Architecture
Multi Level Cell (MLC) NAND Flash with wear leveling 10 channel controller
Interface
Serial ATA 2.0 (3.0 Gb/s)
Dimensions
(W x H x D)
2.74 x 0.37 x 4 in/6.98 x 0.95 x 10.2 cm
Weight
0.18 lb/80 g
Bandwidth Performance
Sustained Sequential Read:
Up to 250 MB/s
Sustained Sequential Write:
Up to 70 MB/s
Random Read:
Up to 35K IOPs
Random Write:
Up to 6.6K IOPs
Latency
Read:
65-ms
Write:
85-ms
Power
DC power requirement:
5 VDC 5%-100 mV ripple p-p
Total power consumption:
0.15W (active); 0.075W (idle)
Useful Drive Life
35TB written, up to 20GB/day for 5 years
Environmental
(all conditions, non-condensing)
Operating Temperature:
32° to 158° F (0° to 70° C)
Relative Humidity:
5% to 95%
Maximum Wet Bulb
Temperature
(operating):
84° F (29° C)
Shock:
1,500 G/0.5-ms
NOTE:
For solid state disk drives, GB means 1 billion bytes. 16GB is the unformatted capacity of this drive before a portion of the drive is
reserved for flash management features. Actual capacity varies by content and will be less than 15.8GB.
NOTE:
Use of HP System Software Recovery Disks (SSRD) is not supported on 80GB or 128GB SSD models due to minimum image size
requirements (>=140GB) for the SSRD.
QuickSpecs
HP Compaq 8200 Elite Series
Technical Specifications – Solid State Data Storage
DA - 13879 North America — Version 36 — August 15, 2013
Page 47
