HP Chromebox G3, Maintenance And Service Manual

Page: 32 / 58

5. Remove the bottom cover (3).
To replace the bottom cover, reverse the removal procedures.
I/O side frame
To remove the I/O side frame, use this procedure and illustration.
Table 6-2 I/O side frame description and part number
Description Spare part number
I/O side frame M24729-001
Before removing the I/O side frame, follow these steps:
1. Prepare the Chromebox for disassembly ( Preparation for disassembly on page 27 ).
2. Remove the bottom cover ( Bottom cover on page 27 ).
Remove the I/O side frame:
1. Remove the two Phillips M2.5 × 5.0 screws (1) that secure the I/O side frame to the Chromebox.
2. Detach the bottom shield rear protective strip (2) from the I/O side frame and bottom shield. (The bottom
shield rear protective strip is attached to the I/O side frame and bottom shield with double-sided adhesive.)
The bottom shield rear protective strip is included in the Shield Kit, spare part number L20217-001.
28 Chapter 6 Removal and replacement procedures for authorized service provider parts ENWW