HP Chromebook x360 14 Maintenance And Service Manual Download Page 46

6

Backing up, resetting, and recovering

Backing up

You can back up your data to an optional USB flash drive or SD memory card or through Google Drive. For 
detailed information about creating a backup, go to 

http://www.support.google.com

.

Resetting

A factory reset erases all the information on your computer hard drive, including all the files in the Downloads 
folder. Before you reset, make sure to back up your files to an optional USB flash drive, SD memory card, or 
through Google Drive. The factory reset will not delete any of your files on Google Drive or an external storage 
device.

IMPORTANT:

Resetting permanently erases everything on your computer hard drive, including your 

downloaded files. If possible, back up your files before you reset your computer.

You might want to reset your computer in the following circumstances:

You see the message "Reset this Chrome device."

You are having problems with your user profile or settings.

You have tried restarting your computer, and it is still not working properly.

You want to change the owner of your computer.

To reset your computer:

1.

Under the Settings menu, click Advanced.

2.

In the Powerwash section, click Powerwash.

3.

Click Restart, and then sign in with your Google Account.

NOTE:

The account you sign in with after you reset your computer will be recognized as the owner 

account.

4.

Follow the on-screen instructions to reset your computer.

5.

Once you complete the reset, you can set up your computer and check to see whether the problem is 
fixed.

Recovering

When your Chrome operating system (OS) is not working properly, you can perform a recovery. A recovery 
reinstalls the operating system and software programs and restores the original factory settings. Locally 
saved files and saved networks are deleted for all accounts. Your Google Accounts and any data synced to 
your Google Drive are not affected by a system recovery.

IMPORTANT:

Recovery permanently erases everything on your computer hard drive, including your 

downloaded files. If possible, back up your files before you recover your computer.

40

Chapter 6   Backing up, resetting, and recovering

Summary of Contents for Chromebook x360 14
























































Reviews: