manualshive.com logo in svg

HP Chromebook x360 12b, Maintenance And Service Manual

Share
Download
HP Chromebook x360 12b Maintenance And Service Manual Download Page 37

10.

Slide the display assembly (2) away from the keyboard/top cover and remove the display assembly.

11.

If it is necessary to replace the display panel assembly or any of the display assembly subcomponents:

a.

Insert a case utility tool (1) or similar thin plastic tool into the top edge of the display panel assembly 
and separate the assembly (2) from the display back cover.

b.

Release the left (3) and right edges of the display panel assembly from the display back cover.

c.

Release the bottom edge (4) of the display panel assembly from the display back cover.

d.

Remove the display panel assembly (5).

The display panel assembly is available using spare part numbers L77982-001 (12.0-in, HD+, 
antiglare, LED, UWVA, USI display panel assembly) and L70814-001 (12.0-in, HD+, antiglare, LED, 
UWVA display panel assembly).

12.

If it is necessary to replace the touch control board:

Component replacement procedures

31

Summary of Contents for Chromebook x360 12b































































Reviews:

No comments

Brands by name

Popular brands

Load more brands